123.hp.com/Dj2130 | Quick Guide to setup HP Dj2130 Printer Install Driver

123.hp.com/Dj2130 Ink Setup Installation

Deskjet 2130 Ink
Deskjet 2130 Ink

DJ 2130 Ink Setup Features

  • 123.hp.com/setup 2130 Ink
  • 123.hp.com/Dj2130 Ink
  • 123 HP Setup 2130 Ink
  • HP Deskjet 2130 Ink Support
  • HP Dj2130 Ink Airprint Setup
  • 123 HP Setup Deskjet2130 Ink
  • 123.hp.com/Deskjet 2130 Ink windows 10
  • HP Dj2130 Ink Wireless Setup
  • HP ePrint DJ 2130 Ink Installation
  • HP DJ2130 Ink driver Software
  • HP dj2130 Ink printer driver download Install
  • HP 2130 Ink printer without disk
  • HP Dj2130 Ink Troubleshooting
  • 123.hp.com/Dj2130 Ink iPhone driver

First Time Printer Setup

Open the box to find on top of the HP DeskJet 2130 Ink All-in-one Printer the following: at 123.hp.com/Dj2130 Black Ink Cartridge, an HP 123 Setup Tri- Color Ink Cartridge, a software CD, a setup poster and a power cord. The 123.hp.com/Dj2130 Ink All-in-one Printer designed to fit anywhere you want it to. Unpack the power cable that included in the accessories, and plug it into the port on the rear of the printer and then plug the other end of the cord into a wall outlet.

Turn on the printer by pressing the power button. To install the setup ink cartridges, open the ink cartridge access door. The right cartridge slot has been allotted to the black ink cartridge and the left slot has been allotted to the tri-color ink cartridge. Insert the setup cartridges into the respective slots, click them into place and then close the cartridge access door.

Install the Softwares and Drivers

Load the Software and drivers installation CD for both Mac and Windows included among the accessories of this printer on your computer and run the installer. Follow the prompts on the screen to complete the printer installation process. Alternatively, the Software and drivers for the 123.hp.com/Dj2130 Ink All-in-one Printer can also be downloaded from the official HP website. The procedure to download the software and drivers online is as follows.

In the official HP website,

enter in the search box the name of your printer along with its serial number and search. Select Software and Drivers and go to the software and driver results page. Select the operating system that you use and its version from the drop-down lists and click Update. Download the required drivers and software from the list of available Driver-product installation software compiled by HP and then install them.

Step By Step Procedure to Replace Ink Cartridges

Turn on the printer by pressing the power button and open the ink cartridge access door. To remove the cartridge, press down on it until it released from its slot. Remove the packing material on the cartridges. Make sure you do not touch the copper-colored contacts or nozzles while removing the protective strip of plastic. From, touching them can result in clogs, ink failure, and bad electrical connections. The right cartridge slot allotted to the black ink cartridge and the left slot allotted to the tri-color ink cartridge. Insert the setup cartridges into the respective slots, click them into place and then close the cartridge access door of 123.hp.com/Dj2130.

Procedure to Resolve Print Quality Issues

Issues like missing black or color ink in the printed output, or the printed page is blank or has very little ink can resolve as follows: Use genuine 123.hp.com/Dj2130 ink cartridges Check ink levels and replace ink cartridges that are critically low or empty To view the ink levels in Windows: With your printer turned on, click the name of your printer in the HP folder on your computer. Click Maintain Your Printer and in the Device Services Tab, click Estimated Ink Levels. To check ink levels in OS X: With your printer turned on, search the Mac for Print and select Print & Fax / Print & Scan /Printers & Scanners Click the name of your printer, and select Open Print Queue. Open Printer Setup or Settings and click Click Open Printer Utility and select Supplies Status. Clean the ink cartridges

In Windows:

With your printer turned on, click the name of your printer in the HP folder on your computer. Click Maintain Your Printer and in the Device Services Tab, click Clean Ink Cartridges If the print quality of the test page is acceptable click ok. Else, click Second-level Clean.

In OS X:

With your printer turned on, search the Mac for Print and select Print & Scan Click the name of your printer, and select Open Print Queue. Click Open Printer Utility and select Clean Printheads. If the print quality of the test page is acceptable click Ok. Else, click Second-level Clean.

Identify the problem 123.hp.com/Dj2130 ink cartridge and replace it Review the test page and check to see if there are any defects in the black text and the colored blocks on the page to identify the defective cartridge and replace it. Contact HP Support if the print quality issues persist.

Printer  Offline (Mac)

To restore the communication do as follows: If the connection has been established via a USB cable: Turn off the printer and disconnect the USB cable After a while, turn on the printer, reconnect the USB cable and try printing again. If the connection established via network Unplug the power cord from the router. After a while replaying it and wait for it to re-establish a connection to the internet service provider. Restart your printer. On your Mac, click on the apple icon and go to system preferences. On Printers and Scanners / Print and fax /Print and scan check to see if the name of your printer displayed under the printer’s list.

If displayed, then the connection has been restored. 3. Power reset Unplug the power cord from the printer and the wall outlet. Reconnect it after a while and turn on the printer. Stored values in the firmware are reset during the power reset. Try printing again to see if the connection has been restored. Disconnect all the 123.hp.com printers connected to your Mac except for the one you are trying to print from. Search the Mac for Print and select Print & Fax / Print & Scan /Printers & Scanners. Disconnect the other printers and try printing using your printer as the default printer.

Create a new printing session Delete your printer from the printers list and then add it back. Click Print. If in the Use list your printer doesn’t show up, download the latest drivers and when your printer queue appears in the list try printing again. Reset the printing system Select Reset Printing System by right-clicking in the printers list. Enter the administrator username and password, when prompted to confirm your choice.

Printer  Offline (Windows)

To restore the communication do as follows: If the connection has been established via a USB cable: Turn off the 123hp.com/dj 2130 Ink printer and disconnect the USB cable After a while, turn on the printer, reconnect the USB cable and try printing again. If the connection established via network Unplug the power cord from the router. After a while replaying it and wait for it to re-establish a connection to the internet service provider. Restart your printer. On your Mac, click on the apple icon and go to system preferences.

On Printers and Scanners / Print and fax /Print and scan check to see if the name of your printer displayed under the printer’s list. If displayed, then the connection has been restored. 3. Power reset Unplug the power cord from the printer and the wall outlet. Reconnect it after a while and turn on the printer. Stored values in the firmware are reset during the power reset. Try printing again to see if the connection has been restored. Disconnect all the printers connected to your Mac except for the one you are trying to print from Search the Mac for Print and select Print & Fax / Print & Scan /Printers & Scanners. Disconnect the other printers and try printing using your printer as the default printer.

Create a new printing session Delete your printer from the printers list and then add it back. Click Print. If in the Use list your printer doesn’t show up, download the latest drivers and when your printer queue appears in the list try printing again. Reset the printing system Select Reset Printing System by right clicking on the 123.hp.com/Dj2130 printers list. Enter the administrator user name and password, when prompted to confirm your choice.

Note:

Resetting the printing system deletes all the devices in the print queue. Add your printer back to the list and try printing. If your printer is connected to a guest or host network and then reconnect to your own network. Connect your printer to another Mac and try printing to see if the problem persists. If your wireless router supports multicasting, enable it and retry printing. Go to Advanced Network Settings on your printer control panel and then disable the IPv6 setting. Connect using the IP Address In the IP tab, enter your printer’s IP address in the address field. Select HP Jetdirect- Socket next to protocol. If in the Use field, your printer appears, add it and try printing again.

Resolving Printing, Scanning And Printer Issues Using HP Print & Scan Doctor (Windows)

Note: The HP Print and Scan Doctor a free tool supported in Windows 10, 8, 7, Vista, and XP that can download online. Confirm your printer connected, Turned ON and listed in the start menu. If not listed, open HP Print and Scan Doctor and click My product not listed. Select your printer, click Retry and then Click Select your connection type, follow the instructions on the screen and then click Retry. Select either Fix Printing or Fix Scanning. Note: A white checkmark indicates that the printer passed the tests. A white wrench indicates that Print and Scan Doctor found an issue and repaired it.

A yellow exclamation mark indicates that the test failed and that user action required but the step was skipped. Follow the on-screen instructions to resolve the issue if a red X displayed. The HP Print and Scan Doctor can also used to test the status of the printer spooler, print queue, device manager, device conflicts, driver check, Windows (WIA) Scan, 123.hp.com/Dj2130 Twain Scan, and HP Scan. Additional tools and features of HP Print and Scan Doctor: Click Printer and then click Supply Levels or Ink Levels to view the estimated ink or toner levels and cartridge details such as installing dates, warranty dates, and serial numbers.

Additional tools and features
  • Click Advanced Printer Data to view information such as your printer model and serial number, firmware and software versions, page count, warranty status, and printhead information.
  • Printer and then click Printer Services to print a Print quality diagnostics page, clean or align the printhead, and print a printer diagnostic page. Click Printer and then click the Show Advanced Info to view the printer’s IP address, Mac address, signal strength, connection, network, and security types.
  • Then click Network to troubleshoot Firewall issues such as not being able to print, the printer not being found on the network, or the printer status displays as being disconnected or offline, even though the printer is connected to the network.
  • In Web services and then click Print ePrint Instruction Page to view ePrint information. A Web Services information page prints which contain instructions on setting up your printer with HP Connected. Input your printer’s claim code and add your printer to the Devices tab in 123.hp.com/Dj2130 Connected.

Print Jobs Stuck Print on Queue (Mac)

A Stuck print job is one that can’t be deleted or canceled and prevents further print jobs from printing. Listed below are solutions to troubleshoot this issue: Resolve any problems with the hardware like a paper jam or a carriage jam and try printing again. Disconnect the USB cable from the printer and computer and reconnect it after 10 seconds. Confirm that you didn’t accidentally plug into the Ethernet port before you try to print again. Disconnect any USB or Ethernet cables before you turn off the router and the printer.

Turn them on again and try printing. In the Apple menu, go to System Preferences and click Printers and Scanners. Remove any extra entries/ multiple printer queues that might exist for your printer, leaving only one that matches your printer and try printing again. In the Printers list, delete the existing print queue for your printer. Click Add, Print Using, and then select the name of your printer. Try printing again after a new printer queue display in the 123.hp.com/Dj2130 Printers list in an idle status. Confirm that the printer receiving power and that the power button is lit.

If the printer isn’t receiving power, connect it to another outlet. If the power button not lit, turn OFF the printer. Disconnect the power cord, and after a minute, reconnect it back firmly to the printer. Press the power button to turn it on if the printer doesn’t turn on by itself and then try printing again. Select Reset Printing System by right-clicking in the printers list. Note: Resetting the printing system deletes all the devices in the print queue. Enter the administrator username and password, when prompted to confirm your choice. Add your printer back to the list and try printing.

Print Jobs Stuck Print on Queue (Windows)

A Stuck print job is one that can’t deleted or canceled and prevents further print jobs from printing. Listed below are solutions to troubleshoot this issue: Resolve any problems with the hardware like a paper jam or a carriage jam and try printing again. Delete files created in Windows, whenever a print job is sent to the printer. Search for MSC from the Start menu, select 123.hp.com/Dj2130 Printer Spooler from the services lists,

Click Restart the service or click the restart button and then try printing again. Confirm that the printer receiving power and that the power button is lit. If the printer isn’t receiving power, connect it to another outlet. If the power button isn’t lit, turn off the printer. Disconnect the power cord, and after a minute, reconnect it back firmly to the printer. Press the power button to turn it on if the printer doesn’t turn on by itself and then try printing again Disconnect the USB cable from the printer and computer and reconnect it after 10 seconds.

Additional tools and features

Confirm that you didn’t accidentally plug into the Ethernet port before you try to print again. Download and run HP Print and Scan Doctor. In the print queue window, uncheck both Pause Printing and Use Printer before you try printing again. Go to Devices and Printers on the Control Panel, right on your printer, select Set as Default Printer and try printing again Uninstall the printer driver and software from your computer and then download and install the latest full feature driver and software from HP website or install it from the printer installation disk. Right click on your printer in Devices and Printers and then click Remove Device. Detect any issues in the system files of the Windows Spooler service by running the System File Checker.

123.hp.com/setup | HP Envy, Dj, OJ printer Install & Driver setup

123.hp.com/setup